How To Change Bands On Fitbit Charge 3

Changing the ring on a Fitbit device may seem like a unproblematic matter to do, but it tin can be all too easy to end up in a fight with your new Versa 2, Charge, Inspire HR or Ionic.

Customization is one of the existent strengths of Fitbit'due south devices, so it's likely that you'll want to swap out the standard band fairly soon later on ownership - or even simply switch betwixt them ii for the office and workouts.

For those struggling to do so, though, we're here to lend a helping hand. Below, nosotros've got steps on how to change bands for each device, so read on to find out everything y'all need to know.

How to change ring on Fitbit Versa two

Fitbit's latest smartwatch is the pinnacle of all its wares, merely trying to change the ring on any of its Versa models can exist a bit of a trial.

We've chipped plenty of nails trying to force those tiny metal confined into place, listening for the lock, and unfortunately there's no easy style around that procedure.

Related: All-time Fitbit Versa bands

Some bands are easier to switch than others, and all should work across the Versa 2, Versa and Versa Low-cal.

Also, hot tip: if you lot're switching between the minor and large bands, you simply demand to change the bottom half of the ring – save yourself some hassle.

Switch bands on Fitbit Versa 2

one. Turn your Fitbit Versa or Versa 2 onto its front and notice the ii metal release levers, located at the edge of each end of the band and locked into the smartwatch'due south casing.

2. To release the band, slide the pin on the lever in, and so pull the band away from the sentry.

3. To adhere a new wristband, slide the pin into the pocket-sized notch on the watch. And then, equally you fit information technology into one end, line information technology upwardly with the other end and release the pin into place.

4. You should hear the two sides lock into identify, and the band should be stable.

How to change band on Fitbit Charge three

Changing bands on the Fitbit Charge 3 and older Accuse 2 is actually very similar, despite the bound fabricated between generations in the pattern department.

That's because both feature the same strap machinery on the actual tracker, and, similar to the Ionic, switching both sides should really be very easy.

Switch bands on the Fitbit Charge iii

i. Turn over the tracker onto its front and discover the two latches – ane will sit down on either side of the case.

2. To release, press downward on the flat button on the strap. Every bit with the Ionic, you may have to move it around and lock properly before trying to un-snap it from the frame.

3. Then to adhere a new band, only slide it into the latch until you hear it snap into identify.

Finding solid tertiary-party bands for this tracker isn't necessarily easy, so check out our all-time Fitbit Charge 3 bands to buy.

How to alter band on Fitbit Ionic

The Fitbit Ionic is peradventure the easiest device to customise within the Fitbit family unit, with its clip system helping yous snap dissimilar bands into place in just a few seconds. It'south easier than the Versa 2, that'due south for sure.

Switch bands on the Fitbit Ionic

1. Turn the Fitbit Ionic onto its front and locate the band latches – there'll be one on each stop for you to unclip.

two. To release, button down on the flat button on the strap on both sides. Sometimes you may have to wriggle it around, peradventure lock properly into the lookout, before fully releasing it from the instance.

iii. To attach a new ring, simply line it upwardly with the latch on both sides and press in until you can hear information technology snap into place.

Need some assist finding more bands to pair with your device? Check out the top Fitbit Ionic bands currently bachelor.

How to change band on Fitbit Inspire Hour

Irresolute the band on a Fitbit Inspire or Inspire HR is actually very similar to the machinery used on the Versa, with quick-release levers used.

It's not the easiest, and can actually be tough to lock into place, but you lot'll go the hang of it.

Switch bands on Fitbit Inspire

1. Turn the tracker onto its front and locate the quick-release lever – ane will be on each side of the tracker.

2. If you want to release that half of the band, push the lever in and simultaneously pull the band abroad from the tracker. Repeat on the other side to finish upward with a band-less tracker.

three. To attach a new strap, line the pivot up with the hole in the tracker opposite the quick-release lever.

4 . Once it's tucked in on one side, push the lever in and do the same in order to slide information technology into the other.

v. With both sides inserted, let go of the lever and requite the ring a quick pull to ensure it's all locked into identify – you should hear a snap on the 2nd hole.

How to modify band on Fitbit Alta

Whether y'all're trying to change the band on a Fitbit Alta HR or the regular version, the process is just the same.

And since this is Fitbit'south sleekest and most stylish tracker, with plenty of designer bands at your disposal, rotating bands is an essential skill for any possessor.