How To Change Rear Wiper Blade On 2011 Toyota Sienna

Toyota Sienna Rear Window Wiper Bract Replacement Guide
How to change the rear windshield window wiper blade on a third generation 2011 to 2016 Toyota Sienna minivan.

Wiper Arm In Downward Position
Enhance Wiper Arm Off Window This automotive maintenance tutorial was specifically written to assist owners of the third generation (2011, 2012, 2013, 2014 and also the updated 2015 & 2016 model years) Toyota Sienna minivan in changing the rear windshield window wiper blade.

Owners of other Toyota vehicles with a like rear window wiper such as the FJ Cruiser, Venza, Highlander, 4Runner, Sequoia, RAV4 and State Cruiser, may besides discover these DIY instructions to be helpful.

The original OEM rear window wiper blade size in inches is sixteen" long.

Some uniform replacement new aftermarket 16" blades with their part numbers are as follows: Trico 16-A, Anco AR-16A, Bosch H409, Michelin 9516, Toyota 85242-08020 and Pelting-X R16A.

No tools are needed to supervene upon the rear wiper bract.

Rotate Bract Away From Arm
Popular Blade Out of Subclass The showtime few steps are to sit down in the commuter's seat, plough the ignition central to the "On" (accessory) position, but do not first the engine, and activate the rear window wiper.

Watch the wiper in the rear view mirror and when you lot see the wiper arm facing directly downward, quickly turn the ignition key to the "Off" position.

Move to the outside of the rear window and gently lift the wiper arm off the window.

Rotate the wiper blade away from the wiper arm until information technology is most perpendicular.

Gently popular the mounting bar in the center of the wiper blade out of the "C" shaped socket at the end of the wiper arm.

Wiper Arm On Rear Window
Line Up Wiper Mount Bar & "C" Socket Gently rest the wiper arm downwardly on the window. The plastic arm shouldn't cause whatever harm to the glass, but yous may choose to place a towel betwixt them to protect the window.

I recommend buying the genuine OEM Toyota 85242-08020 rear wiper blade.

Line upwardly the mounting bar in the center of the new wiper blade with the "C" swivel socket at the finish of the wiper arm.

Pop New Blade On Arm
Rotate New Blade Parallel Hold the new wiper blade at almost a perpendicular bending to the wiper arm.

Gently popular the mounting bar in the middle of the blade in to the "C" socket at the terminate of the wiper arm.

Then rotate the new blade until it is flush (parallel) against the wiper arm. Brand sure that the new blade is deeply attached to the wiper arm.

Lower Arm To Window
Wiper Arm Retracted Lower the wiper arm assembly down to the rear window.

Move to the driver's seat, turn the ignition to on, and allow the wiper arm to return to it'southward resting position at the tiptop of the window.

It would be a good idea to thoroughly clean the rear window at this time for optimum wiper operation. I also recommend applying a glass treatment product that volition repel water such as Rain-X.

For more, please check out my other Toyota Sienna Repair & Maintenance Guides.

Source: https://www.paulstravelpictures.com/Toyota-Sienna-Rear-Window-Wiper-Blade-Replacement-Guide/

Posted by: laddcompearid1993.blogspot.com